Primes MicroSpotMonitor Plus HighBrilliance, Original Instructions Manual

Page: 35 / 116

35 Revision 00 EN - 02/2022
MSM+ HB
35,0(6
8 Connections
Only the supplied PRIMES power supply unit and the supplied connection cables and hoses may be used to
establish the connections.
8.1 Overview of the connections
Power supply
Input
external trigger
Output
internal trigger
Safety interlock connec-
tion for laser system
On/off switch
LAN-port
Safety interlock connec-
tion for PLM
Safety interlock connec-
tion for fiber bridge
Fig. 8.1: Electrical connections at the device
Both a cooling water supply and a compressed air supply are required to operate the MSM+ HB.
The device is equipped with a HighBrilliance measuring objective, which has to be cooled with water and
flushed with compressed air. The required hoses are already preassembled.
Compressed air
connection
(front side)
Cooling circuit return
Cooling circuit inlet
Fig. 8.2: Water and compressed air connections at the MSM+ HB20