manualshive.com logo in svg

Primes Cube L1, Operating Manual

Share
Download
Primes Cube L1 Operating Manual Download Page 20

35,0(6

Cube L1

20

Revision 01/2019 EN

NOTICE

Damaging/Destruction of the device
If the safety interlock is not connected, the device can be damaged or 
destroyed due to overheating.

X 

When connecting the laser control, please ensure that the laser is turned 
off in case of an interruption of the connection.

Pin diagram safety interlock 
plug (view connector side)

Pin

Wire color

Function

1

4

3

4

Black

Mutual pin

1

Brown

Connected with pin 4, when ready for 
operation

3

Blue

Connected with pin 4, when in safety 
interlock mode (absorber too hot)

Tab. 9.1:  Pin assignment of the safety interlock plug

9.2 

Micro-USB socket

You can charge the rechargeable lithium ion battery of the device by plugging it into 
the micro-USB socket on the PC. A suitable cable is included in the scope of delivery. 
When using the optional LaserDiagnosticsSoftware LDS (not included in delivery), the 
device communicates with the LDS via the micro-USB socket or bluetooth.
You will find the PRIMES USB-driver for all USB-capable devices on the PRIMES web-
site at: https://www.primes.de/en/support/downloads/software.html.

9.3 

Bluetooth

A class 1 Bluetooth interface is integrated in the device. This enables a wireless con-
nection with the PC, tablet or the smartphone. When connected to a PC with a class 1 
Bluetooth stick, the range under free space conditions is approx. 100 m. After switch-
ing on the device, the Bluetooth connection is permanently active. When the Bluetooth 
connection is activated, the USB interface is deactivated.
When using the optional Cube App for mobile devices with Android™ (not included in 
delivery), the device communicates with the app via Bluetooth. The Cube App is avail-
able for free in Google Play-Store/Apps.

Summary of Contents for Cube L1

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands