manualshive.com logo in svg

Primes Cube L1, Operating Manual

Share
Download
Primes Cube L1 Operating Manual Download Page 14

35,0(6

Cube L1

14

Revision 01/2019 EN

8 

Installation/Removal

8.1 

Prepare installation

1. 

Turn off the laser source.

2. 

Ensure that moving parts, e.g. robot arms, etc. are at a standstill and that they 
cannot be set in motion unintentionally.

DANGER

Serious eye or skin injury due to laser radiation
If the stability of the device is not guaranteed or the inlet aperture is not 
centered and mounted perpendicular to the laser beam, increased scat-
tered or directed reflection of the laser beam will occur.

X 

Align the device as described in chapter 8.2 on page 15.

X 

Install the device according to chapter 8.3 on page 17 in a way that 
ensures, that the device can not shift or fall.

NOTICE

Damaging/Destruction of the device
Contamination and fingerprints on the protective window can lead to 
damage or shattering or splintering of the protective window during mea-
suring operation.

X 

Do not touch the protective window.

X 

Only operate the device with a clean protective window.

Summary of Contents for Cube L1

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands