BeamMonitor BM+
35,0(6
29
Revision 02 EN - 02/2022
9.3.4
Move axes
Within all measuring modes, the mea-
suring tip can be moved to a defined
y-position.
1. Click on the
Advanced
tab.
2. Click on the arrow to open the drop-
down list.
Use one of the following options:
X
Enter a value in the parameter field
and confirm the entry with the Enter
key.
X
Use the slider below the input field.
3. Click on the
Move to y-position
button.
The
Confirmation
window appears.
4. If necessary, switch off the laser.
5. Check the
Acknowledge
box and
click
OK
.
The measuring tip is moved to the
entered y-position.
