PRIMERGY BX620 S3 User Manual Download Page 197

Page: 197 / 287

197

PRIMERGY BX620 S3 Server Blade User’s Guide

Inst

llin
g I
n

al O

tions

7.6.2 Available Expansion Boards

The table below lists the expansion boards available on this server blade.

7.6.3 How to Install an Expansion Board

Turn off the server blade.

→

"3.3 Turning off the Server" in "BX600 S2 Blade Server System Unit Hardware Guide"

Touch a metal part of the chassis to discharge static electricity.

Remove the server blade from the chassis to install an expansion board.

→

"4.2 Installing Server Blades" in "BX600 S2 Blade Server System Unit Hardware Guide"

Remove the top cover.

"7.2 Removing and Attaching the Top Cover" (pg.176)

Install the expansion board.

Check that the expansion board is securely inserted to the slot.

table: Available Expansion Boards

Product name

Model

2 Gbit/s FC I/O Module

PG-FCD101

PG-FCD102

1Gbit/s Ethernet I/O Module

PG-LND101

PG-LND102

Expansion board

Expansion board slot

[Rear]

Summary of Contents for BX620 S3
































































































































































































































































































Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S3, User Manual

Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands