PRIMERGY BX620 S3, User Manual

Page: 132 / 287

132
Chapter 5 Operations after OS Installation
• Included information
Common header, minidump header, kernel module, memory information, processor information,
process information, thread information, stack page, unloaded module information
• Required size
2MB or more
■
Memory Dump File Setting
Set up the memory dump file according to the following procedures:
1
Log on to the server with administrator privileges.
2
Check free space of the drive where the memory dump file is to be stored.
Check the required amount of free space according to "
■
Checking Hard Disk Free Space"
( pg.131).
If the drive has no free space, refer to "
■
Event Log Errors after Installation" ( pg.253).
3
Click [Start]
→
[Settings]
→
[Control Panel].
4
Double-click the [System] icon.
The [System Properties] window appears.
5
Click the [Advanced] tab and click [Startup and Recovery].
The [Startup and Recovery] window appears.