PRIMERGY BX620 S2, User Manual

Page: 52 / 289

52
Chapter 3 OS Installation Using ServerStart
3.1.4 Disk Wizard
Create and format hard disk partitions.
The disk wizard starts up with the default settings. Be sure to click [MODIFY] to check the settings.
Change them as necessary.
When restarting the disk wizard after the settings are completed in the guided mode under the disk
wizard, save the configuration file. ServerStart may be restarted when the disk wizard restarts. If the
configuration file is not saved, the settings will be erased. In this case, start setting again from the
beginning. If a configuration file is saved, open it to continue the setting process.
1
Click [Disk Wizard: Hard disk partitioning and formatting].
The [Disk Overview] window appears.
When the installation disk has partitions, check [Erase all existing partitions on all displayed
disks].
When other disks than the installation disk have an active partition, create a partition on the
disks with an active partition and check [Erase all existing partitions on all displayed disks].