manualshive.com logo in svg

PRIMERGY BX620 S2, User Manual

Share
Download
PRIMERGY BX620 S2 User Manual Download Page 252

252

Chapter 9  Operation and Maintenance

■

Event Log Errors after Installation

After Windows installation, the following events may be displayed in Event Viewer. Check and perform 

the corrective action against the relevant event.

table: Error events at installation

ID

Description

Cause and corrective action

9

The device ****, did not respond 
during the timeout time.

This message may appear when an expansion card such as a 
SCSI card is installed. However, this is not a problem.

15

The device, ****, is not ready for 
access yet.

This message may appear when an expansion card such as a 
SCSI card is installed. However, this is not a problem.

62

This computer is a domain PDC at the 
root of forest. Use the net command 
"net time /setsntp:<server name>" to 
configure it for synchronization from 
an external time source. 

Cause:
An NTP was selected as a component.
Corrective action:
ServerStart cannot configure the NTP server due to the 
absence of items for specifying it. After OS installation, 
perform the following procedure to specify the time server.

1. Start SNTP server operation on another machine.

Assume that the SNTP server address is 
<172.22.78.246>.

2. Enter the following at a command prompt.

net time /setsntp:172.22.78.246
w32tm -s 172.22.78.246

Note: 

The server blade periodically synchronizes with the 

clock of the Management Blade. When using the NTP 

client, set [Sync RTC with Mgmt. Blade] to [Disabled] 

in "8.2.2 Main Menu" (

pg.199) of the BIOS Setup 

Utility. 

1000

The user or computer name cannot be 
identified. The return value is "1722".

Cause:
The primary DNS server address may be invalid or the server 
cannot be connected.
Corrective action:
Perform the following procedures to correct the DNS address 
in Internet protocol (TCP/IP) properties.

1. Right-click [My Network] and click [Properties].
2. Right-click [Local Area Connection] and click 

[Properties].

3. Click [Internet Protocol (TCP/IP)] and click 

[Properties].

4. Enter the correct DNS address in the [Primary DNS 

server] box.

Summary of Contents for BX620 S2


































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands