PRIMERGY BX620 S2 User Manual Download Page 250

Page: 250 / 289

250

Chapter 9 Operation and Maintenance

■

Error Messages during Installation

The following error messages may appear during installation using ServerStart. Check the corrective

action against the relevant error.

●

"WzDiskAdmin: Partition detected! Please delete all partition before starting
Configuration" is displayed.

Run the guided mode or preconfiguration mode again. Check [Erase all existing partitions on all

displayed disks] in the disk wizard.

●

"WzRaid: RAID arrays detected! Please delete all RAID arrays before starting
Configuration" is displayed.

Use the ServerStart floppy disk you have created. Check [Delete existing RAID array] or select [Use

existing array] in the RAID wizard.

●

"Operating System not found" appears when the system restarts after file
copy from the CD-ROM.

The Active flag may be specified. Check the settings.

●

"Missing Operating System" appears during installation.

The installation partition size may be too large. Specify the installation partition size correctly.

For details on the installation partition size, refer to "2.3.1 Installation Partition Size" (

pg.37).

●

"Error 1920. Service (PXE Services) failed to start" appears during
preconfigured installation.

The system installed with the preconfigured settings (PXE server) may not be connected to the network.

Check the LAN cable connection and click [Rerun].

Summary of Contents for BX620 S2


































































































































































































































































































Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S2, User Manual

Search results

Summary of Contents for BX620 S2

Reviews:

Brands by name

Popular brands