74
Chapter 5 CLI
●
13. Agent SNMP (1_1_13)
Sets the SNMP agents in the Management Blade.
❑
: Parameter
Parameter
Setting
Contents
1. Set Agent SNMP Enable
❑
enable
❑
disable
Sets SNMP service enable/disable. When using applications
such as ServerView that communicate on SNMP, set to
enable.
2. Set Agent SNMP Security
Enable
❑
enable
❑
disable
Sets whether to ask for user name and password when
[System Indication LED Display Button] in ServerView is
used.
3. Agent SNMP Trap Table
-
Sets and displays a SNMP trap destination table.
"• 3. Agent SNMP Trap Table (1_1_13_3)" (p.75)
4. Agent SNMP Community
String Table
-
Sets and displays the SNMP community name.
"• 4. Agent SNMP Community String Table (1_1_13_4)"
5. SNMP IP Filter Table
-
Performs IP settings that permit SNMP connection.
"• 5. SNMP IP Filter Table (1_1_13_5)" (p.76)
+------------------------------------------+
| |
+------------------------------------------+
Agent SNMP page_1_1_13
(1) Set Agent SNMP Enable : enable
(2) Set Agent SNMP Security Enable : disable
(3) Agent SNMP Trap Table
(4) Agent SNMP Community String Table
(5) SNMP IP Filter Table
Enter selection or type (0) to quit:
