29
PRIMERGY BX600 S2 Blade Server System Unit Hardware Guide
3
S
tan
dard O
p
eration
s
3.4.2 Inserting and Ejecting a Floppy Disk
■
Inserting the Floppy Disk
1
Use the USB Cable and connect a floppy disk drive to the server blade.
→
"Start Guide"
2
Insert the floppy disk drive from the side with the shutter.
After clicking into place, the floppy disk
eject button pops out.
■
Ejecting the Floppy Disk
Make sure that the floppy disk access LED is off. Press the floppy disk eject button.
The floppy disk is ejected.
• Do not eject the floppy disk while the floppy disk access LED is on. The data stored on the
floppy disk may be damaged.
Floppy disk eject button
Shutter
Face the label up
OFF
Floppy disk
access LED
Floppy disk
eject button