PRIMERGY BladeFrame BF200, Initial Setup Manual

Page: 70 / 115

Initial Setup Guide cBlade ES
4-6 Release 5.0
Table 4.4 Electrical Specifications — 30-Amp BladeFrame
BF200
Note: If you are installing the BladeFrame BF200 outside of North
America, the appropriate power cord is available in the
Internationalization kit. Contact Fujitsu Siemens Computers
customer support.
Power
Connections The power switch is located on the connector panel at the rear of the
BladeFrame BF200 chassis. See Figure 4.1 and Figure 4.2 for
locations on the 20-amp and 30-amp chassis options.
Parameter Description Rating/Value
Input Voltage Voltage range 200-240 VAC, auto-ranging
Input Frequency AC input power
frequency range 47-63 HZ, single phase
Input Current Maximum current
rating 24 amps RMS at 200 volts
Power
Consumption System power
range 500 watts minimum to 4,800
maximum
BTU Rating System total 1,750 minimum to 16,390
maximum
Connector Type North America NEMA L6-30P
Connector Type International IEC 309 - 24 amp