PRIMERGY BladeFrame BF200, Initial Setup Manual

Page: 69 / 115

Connecting the BladeFrame BF200 to a Power Source
Release 5.0 4-5
Powering on the BladeFrame BF200
This section describes how to power on the BladeFrame BF200.
After the BladeFrame BF200 is powered on, do not power it off
unless it is being moved or serviced.
BladeFrame
BF200 Power
Distribution
The BladeFrame BF200 power system is available with either a
20-amp or 30-amp spine. The 30-amp option is available for
systems running full configurations of the higher end 4-way
pBlades, which draw more power than 2-way pBlades.
Table 4.3 and Table 4.4 list the electrical specifications for both
options.
Table 4.3 Electrical Specifications — 20-Amp BladeFrame
BF200
Parameter Description Rating/Value
Input Voltage Voltage range 200 - 240 VAC, auto-ranging
Input Frequency AC input power
frequency range 47 - 63 HZ, single-phase
Input Current Maximum current
rating 16 amps RMS at 200/208/230 volts
Power
Consumption System power
range 930 watts minimum to 3200 watts
maximum (varies with
configuration)
BTU Rating System total 3175 BTU/hour minimum to
10,926 BTU/hour maximum
(varies with configuration)
Connector Type North America NEMA L6-20P
Connector Type International IEC 309 - 16 Amp