P r i m a L u c e L a b S . p . A .
E AG L E 4 U s e r M a n u a l
First use: switch on and activation of wireless network
EAGLE is designed to be controlled from an external device (not included with EAGLE) via WiFi. You can use any mobile
device (tablet or smartphone) with any operating system (iOS or Android) or any computer (Windows or macOS). For re-
mote control, you will need to download the “
Microsoft Remote Desktop
” app onto the device (smartphone, tablet, or
computer) that you will use to control your EAGLE. Depending on the App Store for your system, the application can also
be found under the name “
RD Client Microsoft
”. The Remote Desktop client is free and compatible with all operating sy-
stems - iOS, Android, Windows and macOS. As an alternative, you can also use the “
Parallels RDP Client”
that is free and
available for different operating systems.
Install the 2 WiFi antennas (9) included in the package by threading them onto the the proper ports on the side of EAGLE
with the status LEDs. Next, install the GPS antenna (12) onto the proper port located on the opposite side, as shown in
the diagram (image 1).
Please note: since the connectors for the Wifi and the GPS antennas are identical, care must be
taken to attach the antennas to the proper ports. The Wifi antennas must be connected to the side of the EAGLE with
the two antenna ports, the GPS antenna must be connected to the side of the EAGLE with the single antenna port.
p a g e 6
Image 1: thread the WiFI antennas (left) and GPS (right) to the proper ports
