Lay out Foot Platforms (MESH DOWN), opposite one
another (as shown above). Line up 4 connection holes where
each Platform Section meets and secure each hole using
16-M8x55mm bolts .
Attach Hatch Plates to the Foot Platform
(FLAT SIDE DOWN) (as shown above) using
4-M8x40mm bolts
(2 each side)
.
Attach Door Plate (FLAT SIDE DOWN) to one of
the two Hatch Doors (MESH SIDE DOWN)(as
shown above) using
2-M8x40mm bolts .
4a:
Place both Hatch Doors in the center of the
Foot Platform assembly (MESH SIDE DOWN) so that
the hinge sides of both doors face outward towards the
Foot Platform .
4b:
Slide Ladder Brackets over the connection holes
of the Foot Platform (exactly as shown Right)
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
LAY PLATFORMS MESH DOWN
ASSEMBLY INSTRUCTIONS PAGE 1
MODEL: PVTS-800
HOMESTEAD 7’ QUAD POD
Remove all contents from packaging and make sure all parts are present before attempting to assemble.
Tighten all bolt connections by hand first and then when fully assembled, go back and tighten with a wrench.
1
2
3
1
3
2
4a
4b
4
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
2018
©2018 (rev. 3/18)
WWW.PRIMALTREESTANDS.COM