23
This metal hook
faces upward
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Ladder Assembly Instructions
Slide Truss Arm into truss bracket (located on the
top rung of Lower Middle Ladder Section .
Secure using
1-M8x45mm bolt .
Slide the top of Bottom Ladder
Section into the bottom of Lower
Middle Ladder Section . Lining all
holes up, Insert
M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
Slide the top of Upper Middle Ladder
Section into the bottom of Top
Ladder Section . Lining all
holes up, insert
M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
23
A
20
22
20
MAKE SURE ALL BOLTS ARE
TIGHT BEFORE PROCEED-
ING TO TRUSS ASSEMBLY
W A R N I N G
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
U
C
U
D
D
EE
EE
EE
22
Slide the top of Lower Middle Ladder
Section into the bottom of Upper
Middle Ladder Section . Lining all
holes up, Insert
M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
21
EE
21
EE
EE
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)
