background image

 V10

 www.pridemobility.com

   43

A P P E N D I X   I   -   S P E C I F I C A T I O N S

1

Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition, and tire condi-

tion. This specification can be subject to a variance of +10%, -5%.

2

Tested in accordance with ANSI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from

theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum

weight capacity. 

3

Due to manufacturing tolerances and continual product improvement, this specification can be subject to a

variance of  (+ or -) 3 %.

4

AGM or Gel-Cell type required. See IV. “Batteries and Charging.”

5

Battery weight may vary based on battery manufacturer.

6

Includes standard seat.

NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176
series EN12184 standards. All specifications subject to change without notice.

V10 SPECIFICATIONS

Model Number

SC610V

Maximum Allowable Incline

6°  (10.5%)

Maximum Obstacle Climbing Ability

2 in. (5 cm)

Overall Length

3

46 in. (116.8 cm)

Overall Width

3

22.25 in. (56.5 cm)

Total Weight Without Batteries

6

131 lbs. (59.4 kg)

Heaviest Piece When Disassembled

Front Section: 53.5 lbs. (24.27 kg)

Turning Radius

3

42 in. (106.68 cm)

Speed (Maximum)

1

5.5 mph (8.85 km/h)

Range Per Charge

1, 2

15.5 miles (25 km)

Ground Clearance

3

4 in. (10.16 cm) at mid-frame

Weight Capacity

350 lbs. (158.75 kg)

Standard Seating

Type: Foldable Molded Plastic with Sliders
Weight: 28 lbs. (12.7 kg)
Material: Black Vinyl
Dimensions: 
18 in. (45.72 cm) width 
17 in. (43.18 cm) depth

Drive System

Rear-wheel drive, sealed transaxle, 24-volt DC motor

Dual Braking System

Regenerative and electromechanical

Tires

10 in. (25.4 cm) solid 

Battery Requirements

4, 5

Two 12-volt, deep-cycle
Size: U1 (31-36 Ah) or optional 40 Ah
U1 Battery Weight: 24.5 lbs. (11 kg) each
40 Ah Battery Weight: 32.5 lbs. (14.74 kg) each

Battery Charger

Off-board 

Summary of Contents for SC610V

















































Reviews: