background image

32

www.quantumrehab.com

Quantum 6000Z Series

V I .   B A T T E R I E S   A N D   C H A R G I N G

BATTERIES AND CHARGING

Your power chair uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance free.
Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep-cycle batteries are designed to handle a
longer and deeper discharge. Though they are similar in appearance to automotive batteries, they are not interchangeable.
Automotive batteries are not designed to handle a long, deep discharge, and also are unsafe for use in power chairs.

WARNING! Battery posts, terminals, and related accessories contain lead and lead

compounds.  Wear goggles and gloves when handling batteries and wash hands after

handling.

WARNING! Always use two batteries of the exact same type, chemistry, and amp-hour

(Ah) capacity. Refer to the specifications table in this manual and in the manual supplied

with the battery charger for recommended type and capacities.

WARNING! Contact your Quantum Rehab Specialist if you have any questions regarding the

batteries in your power chair.

Charging the Batteries

The battery charger is essential in providing long life for your power chair batteries. It is designed to optimize your power
chair’s performance by charging the batteries safely, quickly, and easily.

PROHIBITED! Removal of grounding prong can create electrical hazard. If necessary, properly

install an approved 3-pronged adapter to an electrical outlet having 2-pronged plug access.

PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the charger

directly into a properly wired standard electrical outlet.

MANDATORY! Read the battery charging instructions in this manual and in the manual supplied

with the battery charger before charging the batteries.

WARNING! Explosive gases may be generated while charging the batteries. Keep the power chair

and battery charger away from sources of ignition such as flames or sparks and provide adequate

ventilation when charging the batteries.

WARNING! You must recharge your power chair’s batteries with the supplied off-board battery

charger. Do not use an automotive-type battery charger.

WARNING! Inspect the battery charger, wiring, and connectors for damage before each use.

Contact your Quantum Rehab Specialist if damage is found.

WARNING! Do not attempt to open the battery charger case. If the battery charger does not

appear to be working correctly, contact your Quantum Rehab Specialist.

WARNING! If the battery charger is equipped with cooling slots, then do not attempt to insert

objects through these slots.

PROHIBITED! Do not allow unsupervised children to play near the power chair while the batteries

are charging. Pride recommends that you do not charge the batteries while the power chair is

occupied.

WARNING! If your battery charger has not been tested and approved for outdoor use,

then do not expose it to adverse or extreme weather conditions. If the battery charger

is exposed to adverse or extreme weather conditions, then it must be allowed to

adjust to the difference in environmental conditions before use indoors. Refer to the

manual supplied with the battery charger for more information.

Summary of Contents for Quantum 6000Z 3MP
















































Reviews: