background image

2

Basic Operation Instructions

Microdrive Controller

www.pridemobility.com

INFORMATION LABELING

Read and follow the information in the owner’s manual.

Avoid exposure to rain, snow, ice, salt, or standing water

whenever possible. Maintain and store in a clean and dry

condition.

Disposal and recycling - Contact your authorized Pride

Provider for information on proper disposal and recycling of

your Pride product and its packaging.

Copyright © 2006
Pride Mobility Products Corporation
INFMANU2581/Rev B/November 06

The symbols below are used throughout this owner's manual and on the power
chair to identify warnings and important information. It is very important for you to
read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/

situation. Failure to follow designated procedures can cause

either personal injury, component damage, or malfunction.

On the product, this icon is represented as a black symbol

on yellow triangle with black border.

MANDATORY! These actions should be performed as

specified. Failure to perform mandatory actions can cause

personal injury and/or equipment damage. On the product,

this icon is represented as a white symbol on a blue dot with

a white border.

PROHIBITED! These actions are prohibited. These actions

should not be performed at any time or in any circumstances.

Performing a prohibited action can cause injury to personnel

and/or damage to equipment. On the product, this icon is

represented as a black symbol with a red circle and a red

slash.

Summary of Contents for Microdrive Controller





















Reviews: