..\Manuals\RCI-200-RF150 rev.B.doc
Page 8 of 15
Next, set the
number of channels of each
remote
using SW2-1, -2. One channel is
considered 1 analog input/output plus 1 contact
input/output. Hence an RCI-200 can have at most
2 channels.
SW2-1
SW2-2
Channels on Remotes
OFF
OFF
1
ON
OFF
2
Next, set the
number of channels of the host
using SW2-3, -4. An RCI-200 can at most have 2
channels. This is the number of channels that will
be exchanged between the host and each remote.
SW2-3
SW2-4
Channels on Host
OFF
OFF
1
ON
OFF
2
Host Configuration:
To make an RCI-200 operate as a host unit, make
sure that SW2-8 is flipped down.
Next, set the
number of remotes
that the host is
to communicate with using SW1-1, -2, -3. These
switches are binary encoded as shown in the chart
to the right.
SW1-1
SW1-2
SW1-3
# of Remotes
OFF
OFF
OFF
1
ON
OFF
OFF
2
