PRG V476, User Manual

Page: 405 / 444

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL 387
Heads Up Display (HUD)
To interact with Visionary, three new Heads Up Display windows (HUDs) have been added:
+ Command - provides a command-line keypad, command-line feedback, and control buttons (Store, Label, etc.).
+
Encoders - provides encoder control and feedback.
+ Submasters - provides submaster buttons and fader levels.
The HUDs can be accessed from the Operation menu.
As with the panel windows, the HUD windows can be resized by dragging the bottom-right corner.
There is also an option to "pin" the HUD to keep it on top of other windows. To pin a HUD, click on the pin icon at the
top-right corner. When pinning is active, the pin icon will turn from gray to white.
Note: The HUD windows are not exclusive to the Visionary mode. They are also available during normal Vx76 console
operation via the Operation menu.
Drag and detach tabs to create stand-alone
windows. For example, the Submaster tab:
Resize by dragging from corner
Pin Icon