PRG V476, User Manual

Page: 332 / 444

314 V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
Store a Freeze state as cue:
+ Press and hold

Freeze

while choosing a submaster. ("Choose" is activated by touching the specific submaster
on the touchscreen.)
Inhibitive
When set to the Inhibitive mode, the submaster will act as a grandmaster fader for all channels associated with that
submaster.
Note: Use the Channel Filter mode to select which channels will be controlled by the submaster. For instructions on
using the Channel Filter, refer to "Channel Filter" on page 318.
To set Inhibitive mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Select

Inhibitive

checkbox.
Step 3. Press

Close

to close Setup screen.
To release a submaster from Inhibitive mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Deselect

Inhibitive

checkbox or press

Clear

to clear all submaster settings.
Step 3. Press

Close

to close Setup screen.
Press the area
below a
submaster’s
number to
"choose" the
submaster