PRG V476, User Manual

Page: 121 / 444

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL 103
Parameter Columns Window
The Parameter Columns window is used to define which types of information will be displayed in the data window
(columns). Using the cursor, select or deselect the boxes as required.
For Focus and Color, two display options are
available. Focus can be displayed as a single
column and/or two columns, pan and tilt. Color
can likewise be displayed as a single column
and/or up to four individual color columns,
which would provide data for each filter/wheel/
plate mechanism in the luminaire. When the
single Focus/Color box is checked, the column
will display the Preset/Color source, as long as
the data is being taken from a single Preset/
Color. If not from a single Preset/Color, then the
column would display "---." If Pan/Tilt, etc. are
checked then those columns also display the
source, or if set by encoders, the numerical
values. To see both source and # values, select
[P] and [V] (at Luminaire Status window).
Right-click with mouse or trackpad
to bring up shortcut options. Parameters with a checked
box will be displayed in window