PRG V476, User Manual

Page: 105 / 444

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL 87
Image (Gobo)
When [Image] is selected, the soft encoder mapping is as follows:
Page 1
Edge (hard/soft)
w/ [Shift] button pressed - Zoom (large/small)
Effect Index (open/other)
w/ [Shift] button pressed - Effects Rotate (stop/max)
Effect (open/other)
w/ [Shift] button pressed - Effects Spin (stop/max)
Index (open/other)
w/ [Shift] button pressed - Rotate (stop/max)
Rotating Gobo (open/other)
w/ [Shift] button pressed - Rotating Spin (stop/max)
Gobo (open/other)
w/ [Shift] button pressed - Spin (stop/max)
Page 2
Edge 2 (hard/soft)
Rotating Index3 (open/other)
w/ [Shift] button pressed - Rotate (stop/max)
Rotating Gobo3 (open/other)
w/ [Shift] button pressed - Rotating Spin (stop/max)
Rotating Index2 (open/other)
w/ [Shift] button pressed - Rotate (stop/max)
Rotating Gobo2 (open/other)
w/ [Shift] button pressed - Rotating Spin (stop/max)
Fixed Gobo2 (open/other)
w/ [Shift] button pressed - Spin (stop/max)
3D
When [3D] is selected, the soft encoder mapping is as follows:
Time (zero/+1sec)
w/ [Shift] button pressed - Time (zero/-1 sec)
w/ [Fan] button pressed - Time (zero/fan+1 sec)
Delay (zero/+1sec)
w/ [Shift] button pressed - Delay (zero/-1 sec)
w/ [Fan] button pressed - Delay (zero/fan+1 sec)
n/a
Z (min/max)
Y (min/max)
X (min/max)
The Time encoder works with the Timing Filter, making scaled adjustments to timing values. If Fan is turned on, the
timing will be fanned out across the selected channels. (This is good for ripple effects.)
The Delay encoder also works with the Timing Filter, making scaled adjustments to delay values. If Fan is turned on,
the delay will be fanned out across the selected channels. (This is good for ripple effects.)