MBOX
®
DIRECTOR USER MANUAL
51
Editing Multiple Layers
Multiple layers can be selected and edited at the same time. This can be used for quick editing or to create fan
offsets.
Selecting Multiple Layers
Multiple layers can be selected using the Shift [
] and Command [
] keys.
+
Hold down [
] while clicking on layer icon boxes to select a range of layers.
+
Hold down [
] while clicking on layer icon boxes to select individual layers.
Note:
When multiple layers are selected and different layers have different parameter values, the numeric value will
be italicized. Refer to
"Adjusting Relative Offset Across Layers"
on page 52 for more information.
Setting/Resetting All Layer Parameters to Same Value
If multiple layers are selected and a slider is used to change a parameter value, or a new value is entered into the
parameter field, Director will set (or reset) that parameter to the same value for all selected layers.
Multiple Layers Selected
Slider