MBOX
®
DIRECTOR USER MANUAL
23
Hot Key (Keyboard Shortcut) Notes
Previous Scene
Recalls the previous scene in the Scene List.
Next Scene
Recalls the next scene in the Scene List.
Next Scene After End of Loop
Break out of an Autofollow loop by advancing to the scene after the end of
loop.
Create New Scene
Creates a new scene in Scene List, inserting after the currently selected
scene.
Update Selected Scene
Applies manual changes to the current selected scene.
Create New Scene at Playhead
Creates a new scene with current values, with timecode at playhead. If
timecode is running, this can be used to create 'markers' that you update at
a later time.
Move Selected Scene to Playhead
Changes timecode of the selected scene to the playhead time.
Nudge Left
Moves item backward 1 frame (10 frames if the shift key held down).
Nudge Right
Moves item forward 1 frame (10 frames if the shift key held down).
Select Next Scene in Timeline
If a scene is selected in the timeline, this selects the next scene in the
timeline.
Select Previous Scene in Timeline
If a scene is selected in the timeline, this selects the previous scene in the
timeline.
Rewind (Home key)
Goes to first event in the timeline.
Forward To End
Goes to the last event in the timeline.
Next Frame
Moves the playhead forward 1 frame in the timeline.
Forward 10 Frames
Moves the playhead forward 10 frames in the timeline.
Forward 1 Second
Moves the playhead forward 1 second in the timeline.
Previous Frame
Moves the playhead backward 1 frame in the timeline.
Backward 10 Frames
Moves the playhead backward 10 frames in the timeline.
Backward 1 Second
Moves the playhead backward 1 second in the timeline.
Go to selected scene
Moves the playhead to the currently selected event in the timeline. (This can
be different than the currently selected scene in the Scene List.)
View Playhead
Scrolls the timeline view to make the playhead visible.
Zoom In to frames
Zooms the timeline to the sub-second level. Choosing this again zooms in
even further.
Reset Zoom
Sets the zoom level so that all events (in the current sequence) are visible.
Full Intensity or Opacity
Sets Intensity or Opacity to 100% for selected layer(s).
Out Intensity or Opacity
Sets Intensity or Opacity to 0 for selected layer(s).
