12
MBOX
®
DIRECTOR USER MANUAL
Adding Fixtures
Once the network is configured and the Mbox servers are connected, the servers will need to be added to Mbox
Director so they can be controlled. The "Add Fixture" window is used to locate Mbox servers on the network.
Before adding fixtures, it is a good idea to configure the DMX Profile type at the Mbox server’s Setup window
(such as Single Output, Panoramic Dual, Dual Independent, etc.) For more information, refer to
Configuration / Using Dual Output Features"
Note:
Refer to
on page 3 for definitions of "Fixture" and "Server."
To add fixtures:
Step
1. At Mbox Director main screen, click Add Fixture icon [+]. (If no servers are connected, the button will be
flashing.)
Sample Mbox
Fixture List
Add Fixture
Delete Fixture
Protocol
Server Setup:
Server IP
DMX Profile
Active Layers
Server Name
(Connected
Set as Backup
Enable
Passthrough
Specify as
Monitor only
Profile Setting
(Mbox, Serial-
Over-Ethernet)
(Art-Net / sACN)
Servers)
