background image

Safety Instructions

13

EN

Areas of responsibility
Responsibilities of the person in 

charge of the instrument:

•  To understand the safety instructions 

on the product and the instructions in 

the User Manual.

•  To be familiar with local safety 

regulations relating to accident 

prevention.

•  Always prevent access to the product 

by unauthorised personnel.

Electromagnetic Compatibility 

(EMC)

WARNING

The device conforms to the most 

stringent requirements of the relevant 

standards and regulations. However, 

the possibility of causing interference 

in other devices cannot be totally 

excluded.

This equipment has been tested and 

found to comply with the limits for a Class 

B digital device, pursuant to part 15 of the 

FCC Rules. These limits are designed to 

provide reasonable protection against 

harmful interference in a residential 

instal-lation.This equipment generates, 

uses and can radiate radio frequency 

energy and, if not installed and used in 

accordance with the instructions, may 

cause harmful interference to radio 

communications.

However, there is no guarantee that 

inter-ference will not occur in a particular 

instal-lation. If this equipment does cause 

harmful interference to radio or television 

reception, which can be determined by 

turning the equipment off and on, the user 

is encouraged to try to correct the 

interference by one or more of the 

following measures:

•  Reorient or relocate the receiving 

antenna.

•  Increase the separation between the 

equipment and receiver.

•  Connect the equipment into an outlet 

on a circuit different from that to which 

the receiver is connected.

•  Consult the dealer or an experienced 

radio/TV technician for help.

Prexiso P100LCU

FCC statement (applicable in U.S.)

Summary of Contents for P100LCU
















Reviews: