Southbeach
Collection
Model: #21006–Dometop
Instructions online at www.prevuepet.com
read first
REVIEW BEFORE ASSEMBLY
• No tools are required for assembly
• For best results, follow the Steps
in the order they are presented
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE
312.243.3624
ONLINE
www.prevuepet.com
21006 — 09 /16 — USL
Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800] 243-3624 • customerservice @ prevuepet.com
1
To assemble the
BASE
,
you will need these pieces:
• When cleaning the cage and
components, use a soft cloth
or Teflon-resistant scrubber,
such as Prevue’s
Cage Saver
non-abrasive scrub pad (#109).
• Wash the cage and all compo-
nents with warm water and a
mild, environmentally-friendly,
pet-safe soap. Rinse all parts
thoroughly.
• Hand dry parts completely with
a soft dry cotton cloth before
reassembling the cage.
Do not
leave plastic components to dry
in the sun
, as they may warp.
CLEANING
INSTRUCTIONS
Start at the bottom. Pull
the bottom wire hook from
the side panel onto the outer
wire of the back panel.
Keep the loop bend to the
inside of the cage.
Continue up the seam and
catch the remaining hooks
onto the back panel.
Front and back:
Position the bottom wire
between the rim and the
raised tabs in the base.
Sides:
Insert the wire loops
(two per side) into the
slots along the base rim.
2
To assemble the
CAGE BODY
,
you will need these pieces:
3
Attach the cage body to
the base:
