Rabbit Hutch
Covers Models: # 460 (Small) / # 461 (Large)
460-461 — 07/15 — USL
Made in China for
Prevue Pet Products, Inc.
, Chicago IL USA www.prevuepet.com 800 243-3624 customerservice
@
prevuepet.com
read first
REVIEW BEFORE
ASSEMBLY
• Tools are required for assembly. See below.
• An assistant is necessary for hutch assembly.
• Assembly steps and hardware are the
same for both hutch models. Parts differ in
dimensions only.
• Please follow the CARE ADVISORY to
maintain product longevity.
• For best results, follow steps in order.
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE
312.243.3624
ONLINE
www.prevuepet.com
customerservice @ prevuepet.com
TOOLS REQUIRED
• Phillips-head screwdriver for all screws;
if a power drill is used, do not over-
tighten—Prevue is not responsible for
this type of damage.
NOTE
• TWO-PERSON assembly
steps are indicated with
this symbol.
CARE ADVISORY
To maintain the longevity of your purchase,
we recommend that you periodically treat it
with a non-toxic sealant and protect it
with a tarp or other covering during extended
periods of inclement weather.
KEY TO HARDWARE
SYMBOLS
A
= 2" wood screw
B
= 1¼" wood screw
C
= ½" wood screw
HARDWARE INCLUDED
4 ct
6 ct
4 ct
A
B
C
1
To begin assembly of your
HUTCH
, you will need these
pieces:
B
Have an assistant hold the two side
panels upright. Rest the back panel
on the guide blocks [see Fig. 1.1].
Attach the panels together with
[B]
wood screws, using the predrilled
starter holes as guides.
× 4
A
Wood pegs on the front panel will align
with predrilled holes on the legs of the
side panels [see Fig. 1.2].
On the outside legs of the side panels,
locate the predrilled countersunk screw
holes. Using these holes, attach the
panels together with
[A]
wood screws.
Set the plastic debris tray
into the wood frame. Insert
the entire unit into place.
× 4
[ FIG. 1.2 ]
A
B
[ FIG. 1.1 ]