Penthouse Suites
Decorative Bird Cage & Stand—Assembly Instructions
Model #261
Included Parts:
1 Ea—Wire Cage Front Panel/Right Side Panel Section
1 Ea—Wire Cage Back Panel/Left Side Panel Section
1 Ea—Wire Stand Shelf
1 Ea—Wire Pull Out Grill 1 Ea—Base Tray
2 Ea—Perches 1 Ea—Cage Base
1 Ea—Wire Cage Roof 4 Ea—Plastic Stand Clips
2 Ea—Cups with Hoods 4 Ea—Wire Stand Legs
Prevue Pet Products, Inc. www.prevuepet.com Email: [email protected]
Step #1: Assemble Cage Stand & Base
•
Snap Plastic Stand Clips into place on each of the 4
Wire Stand Legs. Squeeze legs tightly together before
snapping clips into position for a tight “snap” fit.
•
Place plastic cage base upside-down onto a table .
•
Snap 4 wire stand legs into bottom of Plastic Cage
Base. Place metal plate of stand leg under snap lip of
base (closest to center of base), then use your finger to
slightly pull back the plastic tab on the outside corner
of the base bottom (labeled “Release”). Cage leg will
snap into place.
See Illustration #1 & #2
Illustration #1
Illustration #2
