Controls and Instruments
4-34
06740_F
FLAT TIRE (WITH OPTIONAL TIRE PRESSURE MONITORING SYSTEM)
Illuminates when a tire pressure is 25% below the target tire pressure.
06740_G
HILL START ASSIST
Indicates a malfunction of the hill start assist function. This function might not be
available.
06740_H
ANTILOCK BRAKE SYSTEM (ABS)
Illuminates when the ABS is not available or when the ABS is malfunctioning. Since the
ABS system does not operate at less than 4 mph (7 km/h), the indicator will remain
illuminated until the coach reaches that speed. Refer to
Other Features
chapter.
06740_I
TRAILER ANTILOCK BRAKE SYSTEM (ABS)
Illuminates when the trailer ABS is not available or when the trailer ABS is
malfunctioning.
06740_AA
TCS/ESC - TRACTION CONTROL SYSTEM AND ELECTRONIC STABILITY
CONTROL
At vehicle ignition, TCS/ESC telltale
lamp illuminates for approximately 3 seconds and
then turns off.
If it remains on steadily (not flashing) after ignition, or if it illuminates
steadily while you are driving, the TCS or ESC system may not be fully functional or their
operation may be completely disabled. If this happens, your vehicle will still have normal
service braking and it still can be driven, although without the benefits of TCS or an ESC
system.
Flashes slowly
when TCS’s Mud/Snow mode is turned on using the Mud/Snow switch.
Flashes quickly
when ESC or TCS intervenes to reduce risk of loss of control.
06740_K
HIGH BEAM
Illuminates when the high beams are selected. High and low beams are selected with
the multi-
function lever. Refer to “
Steering Column Controls
” paragraph in this chapter.
Summary of Contents for X3-45 VIP 2017
