manualshive.com logo in svg

PREVOST X3-45 VIP 2017, Owner'S Manual

The PREVOST X3-45 VIP 2017 is a luxurious and top-of-the-line coach bus that exudes class and sophistication. For a comprehensive understanding of its features and functionalities, make sure to download the free Owner's Manual from manualshive.com. This manual is a valuable resource for all owners to ensure optimal performance of their vehicle.

Share
Download
background image

 

Technical Information 

 

9-13 

NOTE 

Record the VIN in the vehicle documentation 
and keep with company records. The VIN will 
normally be used for vehicle registration, 
service reference needs  and for obtaining 
vehicle insurance coverage.

 

VEHICLE FINAL RECORD 

The  Vehicle  Final Record is a record of all data 
pertaining to the assembly of the vehicle. This 
record is shipped to the new customer via a 
courier company. Retain this record in the 
company records office for reference and safe-
keeping. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for X3-45 VIP 2017





















































































































































































































Reviews:

No comments

Related manuals for X3-45 VIP 2017

Brands by name

Popular brands

Load more brands