PREVOST X3-45 VIP 2015, Owner'S Manual

Page: 97 / 190

Other Features 5-19
DATA LOG
1. Vehicle ID
2. Total Data
Total Data menu indicates the accumulated engine values that have been
logged during the lifetime of the engine ECU.
Available information:
•
Total distance traveled
•
Total fuel used
•
Total engine hours
•
Total idle time
•
Total PTO hours
•
total engine revolutions
3. Trip Data
This menu displays the trip information listed below. This function must be
reset before each measurement (before each new trip or leg) using the Reset
Trip Data menu.
Available information for the trip or leg is:
•
Trip distance (miles or km)
•
Trip fuel average (mpg, liter/100km; km/liter)
•
Trip fuel used (gallons or liters)
•
Trip duration on cruise control (hours)
•
Trip duration with engine rpm greater than economy rpm (hours)
•
Trip duration while engine rpm is greater than the desire maximum rpm
RPM Limit set in Fleet Limits sub-menu (hours)
•
Trip fuel used with engine rpm greater than the economy rpm
(gallons/liters)
•
Trip average speed (mph, km/h)
•
Trip duration with speed greater than the maximum desired speed as set
in Fleet Limits sub-menu (hours)
•
Trip engine hours
•
Trip duration on engine idle (hours)
•
Trip fuel used while in engine idle (gallons, liters)
4. Reset Trip Data
This menu can only be accessed if the correct password has been entered.
Use this function to reset measurements of the Trip Data menu before each
new trip or leg.