PREVOST X3-45 VIP 2015, Owner'S Manual

Page: 164 / 190

Technical Information 9-12
INDEPENDENT FRONT SUSPENSION
16176
SAFETY CERTIFICATION
Vehicle components meet specifications and
standards as follows:
o
Material and parts conform to ASTM and/or
SAE standards in effect at the time of
manufacture.
o
All factory-installed interior materials meet
FMVSS 302 for fire resistance.
o
Certified according to Provincial, State and
Federal Safety standards (Canadian and
US) BMCSS, FMVSS and CMVSS.
o
Other applicable certification labels are
affixed to the component.
DOT CERTIFICATION PLATE
This certifies that vehicles manufactured by
Prevost Car Inc. comply with all Federal Motor
Vehicle Safety Standards at the time of
manufacture. Information such as gross vehicle
weight rating and tire pressure is also marked on
this plate. The DOT Certification plate is affixed
to L.H. control panel.
DOT CERTIFICATION PLATE
00016
VEHICLE IDENTIFICATION NUMBER
(VIN)
VEHICLE IDENTIFICATION NUMBER
00017
The Vehicle Identification Number is stamped on
a plate located on the windshield frame pillar
(driver's side). The VIN is visible from the
outside of the vehicle. Make sure the correct
vehicle identification number is given when
ordering replacement parts. Using the VIN when
ordering parts will facilitate processing.
NOTE
Record the VIN in the vehicle documentation
and keep with company records. The VIN will
normally be used for vehicle registration and
for obtaining vehicle insurance coverage.
COACH FINAL RECORD
The Coach Final Record is a record of all data
pertaining to the assembly of the vehicle. This
record is shipped to the new customer via a
courier company. Retain this record in the
company records office for reference and safe-
keeping.