manualshive.com logo in svg

PREVOST H 2018 Series, Operator'S Manual

The PREVOST H 2018 Series Operator's Manual is a comprehensive guide designed to assist users in operating and maintaining their product. This manual can be easily accessed and downloaded for free from our website, ensuring that users have the necessary information readily available.

Share
Download
background image

CONTROLS AND INSTRUMENTS     4-29 

 

PA1628 H3-41, H3-45 Operator’s Manual

 

To do so, connect the laptop to the modesty 
HDMI connector, select Video IN on the Video 
and Sound Selector and turn on the laptop 
presentation mode.  

Devices using 3.5mm audio connectors (MP3 
players) can also be used by connecting them to 
the 3.5 modesty connectors and selecting the 
Audio IN mode. A USB connection is also 
available to recharge battery operated devices. 

 

Operation Of The Panoramic View Camera 

 

 
 

1.

 

Press  CAM  button to select the 
optional panoramic view camera 
signal. The VIDEO section of the 
VSS-05  LCD panel will show 
“CAM”. The video monitors turn 
on automatically. 

2.

 

Press CAM button again to turn 
off the panoramic view camera 
and return to previous 
audio/video source. 

Display Of The Gps Navigation Guidance 
Screen 

 

Not applicable 

 

NOTE 

When CAM or NAV is selected, the previously 
selected audio source remains active. 

OPERATION OF THE DRIVER MICROPHONE 

 

 
 

1.

 

Press D-MIC button to turn on 
the  driver microphone.  The 
AUDIO section of the  LCD panel 
will show “D-MIC” and a gong 
sound can be heard. 

2.

 

Turn  volume knob to adjust 
microphone level. 

3.

 

Press D-MIC button again to 
turn off the driver microphone.  

Operation Of The Guide Microphone 

 

 
 

1.

 

Press G-MIC button to turn on 
the guide microphone.  The 
AUDIO section of the  LCD panel 
will show “G-MIC”  and a gong 
sound can be heard. 

2.

 

Turn volume knob to adjust 
microphone level. 

3.

 

Press G-MIC button again to 
turn off the guide microphone.  

 

NOTE 

The driver and guide microphones can be 
turned on only by turning the switch on the 
microphone to ON. 

If both the driver and guide microphone are 
activated, the driver microphone has  priority 
and the guide microphone is muted.

 

Background Volume Adjustment 

When a microphone is activated, the current 
audio source volume will reduce to a certain 
level which has been set at the factory. To adjust 
this level, proceed as follows: 

1.

 

Press and hold AUDIO button then press 
AUDIO IN button.  The LCD panel will show 
“BACK GROUND”.

 

2.

 

Turn the volume knob to adjust the 
background level. 

3.

 

Press any button to save the setting. If no 
button is pressed within 8 seconds, the unit 
automatically saves  the setting and exits 
this mode. 

GONG SOUND LEVEL 

 

A gong will sound in the passenger’s area upon 
activating of the microphone. This gong will also 
sound when a passenger activates the service 
bell.  The gong sound level can be adjusted as 
follows: 

Summary of Contents for H 2018 Series



































































































































































































































































Reviews:

No comments

Related manuals for H 2018 Series

Brands by name

Popular brands

Load more brands