16
USER MANUAL
RoadRunner PCDVRR700X
9. Settings
Set up your DVR
Follow the steps to finish settings:
1.
Slide the Power Switch to
ON
to power on your DVR. You will hear a buzzer
beep. Your DVR goes to preview mode at this time.
2. Press [
M
] to enter settings.
3. Press [
<
] or [
>
] to select
Settings
.
4. Use the [
+
] or [
-
] button to select the desired option.
5. Press [
OK
] if your want to set the desired item.
6. Select the parameter by pressing [
<
] or [
>
].
7. Press [
OK
] to confirm your selection.
8. Press [
M
] again to go back to preview mode.
Set up options
The following settings are available:
Options
What it means
Beep
Turn on or off beep.
REC. LED
Turn on of off REC. LED.
Time Display
Add date and time stamp to the videos, voices, and photos.
Auto Standby
Choose a time span to power off your DVR automatically when there is no
operation.
TV Standard
Choose the TV standard: NTSC or PAL.
Format
Format the Micro SD card connected to your DVR.
Default
Restore to default settings.
Language
Select a language displayed on your DVR.
Frequency
Select a band to avoid the impacts on photos caused by flickers from
lighting sources.
Date
Set up the current time and date.
FW
Check the firmware version of your current system.
9
