Prestigio NOBILE 157, Technical & Service Manual

Page: 71 / 126

Removing the LCD Module
1. See “Removing the Battery” on page 53
2. See “Removing the Middle Cover” on page 57
3. See “Removing the Keyboard” on page 58
4. See “Removing the Antennas” on page 59 ( Remove the two screws and put the two antennas aside. Do
not need to release the two RF cables from the upper casea and the sponge.)
5. Disconnect the inverter cable from the main board by using a plastic flat screwdriver and lift the cable up.
6. Remove the two screws as shown, disconnect the LCD coaxial cable from the main board and lift the
cable up.
7. Remove the two screws as shown.
8. Remove the two screws.
TECHNICAL SERVICE MANUAL Prestigio Nobile 157
64