55
USER MANUAL
MultiPhone PSP5307 DUO
Device
Dual SIM management
-
Turn on or off SIM1 and SIM2.
-
Set the default SIM card for voice call.
-
Set the default SIM card for data connection.
The device supports two (2) SIM cards for voice calls and data transfer.
During a voice call or a mobile data session via one of the SIM cards, the second SIM card
becomes inactive (not registered in the network of mobile operator, which means that it
can’t receive incoming calls or carry out data transfer sessions). After the end of call or data
transfer, both SIM cards become active again and registered in mobile operators networks.
Call settings
-
Turn on or off proximity sensor.
-
Set the length of DTMF tones.
-
Enable or disable Connect Vibration Mode.
-
Set to get reminder at 50s of every minute.
Audio profiles
• Tap the desired profile to edit it. Or, tap to add your customized profiles.
-
Select the profiles of the phone.
-
Set the volume, type for ringtong and notification.
Display
Change the settings to control the display and backlight on your device.
Storage
View memory information for your device and memory card.You can also format the memory
card.
Formatting a memory card permanently deletes all data from it.
The actual available capacity of the internal memory is less than the specified capacity
because the operating system and default applications occupy part of the memory.
Battery
View the amount of battery power consumed by your device.
Applications
Manage running applications, move applications to or from the storage card, and install or
uninstall programs.
Personal
Location access
Select the sources to use when determining your location.
-
Access to my location: Set to use Wi-Fi and/or mobile networks for finding the current
location.
-
GPS satellites: Set to use the GPS satellite for finding the current location.
-
Wi-Fi & mobile network location: Let apps use Google's location service to estimate your
location faster.
