Data Safe Pro
EN -
1
User manual
Prestigio Data Safe Pro
Precautions before use
Please read the following instructions carefully before using the product.
The product includes an installed and initialized HDD. Data Safe Pro
uses 5V/900mA from USB 3.0 port. In case of connection with USB
2.0 port, please use a USB to DC power cable included.
Please don‟t place any magnetic material around the device. It may
damage the data of HDD installed in it. Also, don‟t drop or cause any
hard impact to the device. The data of HDD in Data Safe Pro can be
damaged easily by magnetic material or strong impact. It is always
advisable to back up important data.
The encryption of Data Safe Pro is hardware based. Data Safe Pro can
connect and work with all OS, Embedded devices and media players
which support USB host.
Basically Data Safe Pro uses AES (Advanced Encryption Standard)
256 bit encryption algorithms. Additionally, it supports higher level
encryption management via Password input and Master-key
registration. If a user loses or forgets a master-key and password, we
(Prestigio – manufacturer) can‟t rescue or recover any data. User
need to format the HDD to use it again.
Data Safe Pro doesn‟t use any S/W for encryption. Users can set up
the security by inputting 4~8 digits password via front touch panel
buttons of Data Safe Pro.
Data Safe Pro encrypts the entire HDD. Only this Data Safe Pro can be
used for reading or decrypting any information stored on this HDD.
Data Safe Pro supports User Password protection feature. If user
enters wrong password 3 times in a row, the interval to ask password
input is lengthened continuously.
If you forget the Password of Data Safe Pro, you have to visit our
official A/S center or country official distributor to rescue and recover
HDD data. When visiting A/S center, users should bring both Data
Safe Pro and Master-key. Master-key shows the authentication of
owner of Data Safe Pro.
Data Safe Pro supports both security and normal mode. In case of
security mode (with password input), it takes 10 seconds longer
booting-time than normal mode. It‟s because Data Safe Pro is
re-connected after stand-by for the security mode activation and