26
INSTALLATION
The appliance must be kept no less
than 50 mm away from any side
wall which exceed the height of the
cooktop (fig. 9.1).
The furniture walls adjacent to the
cooker must be made of heat-resis-
tant material.
The veneered synthetic material and
the glue used must be resistant to a
temperature of 90°C in order to avoid
ungluing or deformations.
The cooker may be located in a
kitchen, a kitchen/diner or bed-sitting
room but not in a room containing a
bath or shower.
Curtains must not be fitted immediatly
behind appliance or within 500 mm of
the sides.
It is essential that the cooker is posi-
tioned as stated opposite.
Secure the four feet in the holes on
the base of the appliance and adjust
the height.
If the cooker is located on a pedestal
it is necessary to provide safety mea-
sures to prevent it falling out.
The cooker must be installed by a
qualified technician and in compli-
ance with local safety standards.
750
mm
50
mm
450
mm
Fig. 9.1
INSTALLATION
9
LEVELLING
The cooker is equipped with a 4 level-
ling feet which must be fitted to the
base of the cooker in the following
manner:
– Place the cooker on its back as
shown in the figure 9.2.
– Screw the 4 leveling feet to the
cooker.
– Stand the cooker and levelling it by
screwing or unscrewing the feet.
Fig. 9.2
Summary of Contents for PR 60 FSDOE
Page 30: ...30 ...
