The transmitters included with the system have been pre-programmed
at the factory, with each button pre-assigned to control a specific
function of the system. Although the system in the vehicle has either
a 2 or 3 channel receiver, depending on the model, the transmitters
included with the system are capable of transmitting 3 distinct signals.
This allows you to program each transmitter to more than one vehicle
in two car families, and also allows you to change which button(s)
control certain functions of the system.
( Example: Transmitter channel 3 can be programmed to activate
Receiver channel 2. ) Refer to the chart below for access to each of the
transmitter channels, and for the standard factory button assignments.
TRANSMITTER
SYSTEM RECEIVER
CHANNEL BUTTONS
CHANNEL
FUNCTION
1
ARM
1
Remote Arm/Disarm
DISARM
& or **Remote Lock/Unlock
**Remote Emergency Panic
2
OPTION
2
* Pulsed Output for Accessories
3
ARM
3
* Switched Output for Accessories
DISARM
* Second Vehicle Control
& OPTION
Some of the more common accessories for these additional channels
are;
*AS 9154
Remote Garage Door Interface
*AS 9075
Remote car starter
*AS 9153
Remote window roll up
*AS 9256
Remote trunk release relay
** Only Available With Some Systems
Model : APS-OE2B
128-5544A
1 OF 4
TRANSMITTER PROGRAMMING GUIDE
Released 9-24-99
Rev A: References to the APS-33, 3-6-02.
