128-9315
17 of 20
Page 17
S
24
VIBRATE MODE ON
T
his icon will be displayed if you select vibrate instead of tones. To toggle
vibrate on and off, press "F" + Unlock simultaneously.
ALARM CLOCK
This icon will be toggled on and off when the "F" + Trunk/Key buttons are
pressed simultaneously. The feature must be set in the feature selection
menu of the transmitter.
COUNT DOWN TIMER
The unit offers an additional count down timer for situations where an alert
tone may be needed to remind you of something important. Setting infor-
mation shown on previous page.
POWER SAVE FEATURE
Press the "F" and Lock buttons simultaneously to toggle this feature on
and off. With this mode on, the battery in the transmitter will go into a pow-
er down mode when the unit is disarmed.
24 HOUR START TIMER
(Remote Start Models Only)
Standing at the vehicle at the time you want it to start, press the
lock buttons simultaneously for 1 seconds. The transmitter will beep and
display the 24 hr timer. This is the time the vehicle will start when you
follow the exit procedure. In other words, if you want the vehicle to start 6AM,
at 6AM of any morning, standing at the vehicle, press and hold the lock
buttons until you hear a beep and the 24 hr timer is displayed. This establishes
a starting time. The unit will start at the prescribed time once only. This function
must be selected each time you want the vehicle to start. To activate this function,
(a) Turn the ignition switch off. (b) Within 10 seconds of step (a), depress and
hold the brake pedal, while pressing the key icon transmitter button 2 times. (c)
the unit will emit 2 chirps, the transmitter will beep and the start timer icon on the
display will remain on. The vehicle will start at the set time. To toggle this feature
off, press the lock buttons simultaneously until a beep is heard and the 24
hr timer turns off.
TEMPERATURE START MODE (Remote Start Models Only)
This icon will appear when the temp start mode is activated. The vehicle
will start one time automatically when the temperature reaches 0*.
WARNING! Be certain vehicle is outside before activating this mode.
To toggle this feature on of off, from the Locked/Armed mode, press the Option
and Lock buttons simultaneously. (Available on certain remote start models only).
Throughout this manual you will find screen shots where they apply if using the
two way transmitter. If using the one way transmitter while the two way transmitter
is within range of the vehicle, the two way transmitter will update it's screen.
