Operating Instructions
3
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
4).Use the remote controller or press buttons to select input signal source for output A and output B
Indicator of OutputA's input source:The corresponding blue LED light will illuminate according to
which input you connect.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that
the unit is in proper working condition.
Indicator of OutputB's Input source:The corresponding red LED light will illuminate according to
which input you connect.
2).Connect the cables from your displays (monitor or projector) into the HDMI outs of the output A
and output B.
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
Left Panel Rear panel Right Panel
(d)The unit does not operate normally or exhibits a marked change in performance;
Output A port Power input Input ports Output B port
3).Plug the 5VDC power supply into Power input and the unit is ready to use .
1).Connect the HDMI signal sources(Such as PS3,STB etc) into HDMI input.
(a)The DC power supply cord or AC adaptor has been damaged;
Please reset power when there is no signal.
(e)The unit has been dropped or the cabinet damaged.
Connecting and Operating
Attention:Insert/Extract cable gently.
MAINTENANCE
PRODUCT SERVICE
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
