The PRESTAN Professional Adult Series 2000 Manikin Add-On Kit can be used to
upgrade any PRESTAN Professional Adult or Jaw Thrust Manikin (2018 model or newer).
PRESTAN Professional Adult Series 2000 Manikin
Add-On Kit Installation Guide
Step 4
Once everything is loose, carefully remove
the rate monitor, spring and clicker assembly.
COPYRIGHT© 2021 PRESTAN PRODUCTS, LLC Series2000_AddOnKit_InstallationGuide_12721.V3.pdf
Step 1
Pull back skin of manikin torso and
remove the screw securing the rate monitor.
Step 2
Gently place flathead screw driver into slots,
pry to unsnap wire cover. Carefully remove
wire cover after all snaps are free.
Step 3
Place flathead screw driver into slots, pry
to unsnap clicker assembly. Carefully
remove after all three (3) snaps are free.
Tools Needed (not included)
Breath Module
Piston Plug
Add-On Kit
