7.2.7 Changing the Signal Chain
74
Power User Tip:
Placing the compressor before the EQ allows you to make dramatic changes to the EQ set-
tings without needing to alter the compressor setting. However, if you place the EQ before the compressor, you
can better control different frequencies, achieving a more natural response.
用户提示：将压缩器放在
EQ
之前，可以对
EQ
的设置进行大幅度的修改，而不需要改变压缩器的设置。但
是，如果你把
EQ
放在压缩器之前，你可以更好地控制不同的频率，实现更自然的响应。
7.2.7 Changing the Signal Chain
改变信号链
The Compressor and EQ can be reordered in the signal path. By default, the signal passes through the
compressor before passing through the EQ. When reordered, the EQ is placed before the compressor in
the signal path.
压缩器和均衡器可以在信号路径中重新排序。默认情况下，信号先经过压缩器，再经过
EQ
。当重新排序
时，
EQ
在信号路径中被放在压缩器之前。
7.2.8 Equalizer
平衡器
As previously mentioned, an EQ (or equalizer) is a tone control that lets you make changes in the tonal
balance of a signal. You can boost or cut the level of ranges of frequencies, to make corrective or cre-
ative changes to the signal. Like the compressor, your Revelator io44 is equipped with three EQ models
from which to choose: Standard, Passive, and Vintage.
These distinct EQ models have their own set of controls and behavior:
Standard EQ.
A clean and full-featured EQ that offers transparent tone shaping.
Passive Program EQ.
A model of a tube-based EQ with simple, quick and a classic tonal character.
Vintage 1970s EQ.
A model of a classic solid-state EQ, with simple, musical frequency settings and
a lot ofcharacter.
To change the EQ model, click on the dropdown menu. Note: The EQ will turn off whenever a new model
is loaded and must be re-enabled for you to hear its effect on your voice.
如前所述，
EQ
（或均衡器）是一种音调控制，可以让你改变信号的音调平衡。你可以提高或降低各频率范
围的电平，对信号进行纠正或创造变化。与压缩器一样，
Revelator io44
也配备了三种
EQ
模型供你选择。
标准、无源、和复古。
这些不同的
EQ
模型有各自的控制和行为。
标准
EQ
。一个干净的、功能齐全的
EQ
，提供透明的音色塑造。
无源程序
EQ
。一个基于电子管的
EQ
模型，具有简单、快速和经典的音色特征。
复古的
70
年代
EQ
。一个经典的固态均衡器的模型，具有简单的、音乐性的频率设置和大量的特征。
要改变
EQ
模型，请点击下拉菜单。注意：每当加载一个新的模型，
EQ
就会关闭，必须重新启用才能听
到它对你声音的影响。
