7.2 Advanced Fat Channel and Voice Effects Controls
69
Power User Tip:
A high-pass filter attenuates all frequencies below the set threshold. Usethe Fat Channel
high-pass filter to remove unwanted low frequencies from your source signal, rather than trying to EQ them out
.
用户提示。高通滤波器减弱了所有低于设定阈值的频率。使用
Fat Channel
高通滤波器可以从你的源信号中去
除不需要的低频，而不是试图将它们均衡掉。
7.2 Advanced Fat Channel and Voice Effects Controls
高级的
Fat
Channel
和声音效果控制
To open the advanced Fat Channel and Voice Effects Controls, click on the Fat Channel menu at the top
right of Universal Control, or click “Fat Channel.”
要打开
Fat Channel
和声音效果控制，请点击
Universal Control
右上方的
Fat Channel
菜单，或者点击
"Fat
Channel
”。
To edit any of the effects, click on the name of the desired processor from the tabs at the top of the
screen. This will bring its controls into focus.
要编辑任何一个效果，从屏幕顶部的标签中点击所需处理器的名称。这将使其控制成为焦点。
7.2.1 High Pass Filter
高通滤波器
Use this control to set the High-Pass Filter frequency threshold for the selected Chan-
nel or Output Bus. The filter’s threshold can be set from 24 Hz to 1 kHz. When the
threshold is set to its lowest point, the filter is off. The high-pass filter’s slope is -12
dB/8va.
使用这个控制为选定的
Channel
或输出总线设置高通滤波器的频率阈值。滤波器的阈
值可以设置为
24Hz
到
1kHz
。当阈值被设置到最低点时，滤波器是关闭的。
高通滤波器的斜率是
-12dB/8va
。
