25
3
3.1
Universal Control
TheLaunchWindow
Revelatorio24
Owner’sManual
3.1
The Launch Window
3
Universal Control
The Revelator io24 is so much more than a great-
sounding USB interface—and the secret to its advanced
features and mixing capability is unlocked with Universal
Control.
Revelator io24
不仅仅是一个好听的
USB
音频接口
--
其
高级的功能和混音能力的秘诀被
Universal Control
所解
锁。
Before proceeding,
please make sure you have followed the instructions in Section
1.3.2 and have downloaded and installed Universal Control
.
在继续操作之前，
请确保您已经按照第
1.3.2
节的说
明，下载并安装了通用控制。
1.3.2
节中的说明，并已
下载和安装了
Universal Control
。
Get ready for lift off! When Universal Control is launched, you will see the Launch
window. From this window, you can manage all the driver settings for your
Revelator io24.
准备好
!
当
Universal Control
启动时，您会看到启动窗口。从这个窗口，可
以管理您的
Revelator io24
的所有驱动设置。
Sample Rate.
Changesthe samplerate.Youcansetthesamplerateto 44.1,48,88.2,
or 96 kHz. (With Multi Mode on macOS, the sample rate is limited to 44.1 and 48 kHz.)
Ahighersampleratewillincreasethefidelityoftherecording,butwillalsoincrease
thefilesizeandtheamountofsystemresourcesnecessarytoprocesstheaudio.
PowerUserTip:
Formostapplications,leavingthissettingon48 kHzwillyieldthebest
results with the least amount of hassle.
采样率。改变采样率。您可以将采样率设置为
44.1
、
48
、
88.2
或
96kHz
。
(
更
高的采样率将提高录音的保真度，但也会增加文件大小和处理音频所需的系
统资源数量。
高级用户提示：
对于大多数应用来说，把这个设置放在
48kHz
上会产生最好
的结果，而且麻烦最少。
