10
SCAN
(long press)
Press and hold the
UP
or
DN
button (
18
) to
activate
the
SCAN
function. The
dot between the two channel digits flashes to indicate that the function is
active.
The scanning stops as soon as there is a busy channel. The scanning auto-
matically starts 3 seconds after the end of the transmission and if no key is
activated during 3 s. In
SCANNING
mode, turn the
PUSH
rotary knob (
6
) or
press the
UP
/
DN
buttons (
18
) on the microphone to change scan direction.
CB channel Scan
In
CB
mode press for ± 7 seconds or until a beep sounds to activate the
CB
channel Scan
.
Press
PTT
switch (
17
) to exit
CB Channel Scan
. The dot between the two
channel digits disappears from LCD.
WX channel Scan
In
WX
mode press for ± 3 seconds or until a beep sounds to activate the
WX channel Scan
.
Press
for 3 seconds
the
TALKBACK
key (
9
) to exit
WX Channel Scan
. The dot
between the two channel digits disappears from LCD.
Note:
The WX channel scan can run in the background while using the
CB
mode.
A) DC-POWER TERMINAL (13,8 V)
B) ANTENNA CONNECTOR (SO-239)
C) JACK FOR EXTERNAL OPTIONAL SPEAKER (8
Ω
, Ø 3.5 mm)
D) JACK FOR PA OPTIONAL SPEAKER (Public Address) (8
Ω
,
Ø 3.5 mm)
E) JACK FOR OPTIONAL VOX MICROPHONE (8
Ω
,Ø 2.5 mm)
C) MENU
The order of 11 functions is as described in this manual. However, the func-
tion displayed by entering the
MENU
will be the last function modified by
user.
The procedure is the same whatever the function is:
Press
PUSH
knob (
6
) for 3 seconds to
enter
MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the menu.
2.
Press
PUSH
knob (
6
) to
validate.
The
parameter
of the chosen function blinks
on the display.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
modify
the value of the parameter.
4.
New press
PUSH
knob (
6
) to
validate
the chosen value. The parameter
stops blinking and if the function has more than one parameter, the next
parameter blinks.
5.
If no key is pressed, the unit exits
MENU
after 10 seconds. disappears from
the display.
Note:
UP
/
DN
buttons (
18
) on the microphone have the same effect as the
rotation of the rotary
PUSH
knob (
6
).
PTT
switch (
17
)
validates
the last setting
and
exists
MENU
. disappears.
1) COLOR
This function allows to
choose
the backlight color of the LCD.
Press
PUSH
knob (
6
) for 3 seconds to
enter
MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the
COLOR
function.
2.
Press
PUSH
knob (
6
) to
validate.
The current
color
blinks on LCD.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
11
) on the microphone
to
select
the color. 7 available colors are displayed over and over :
4.
New press
PUSH
knob (
6
) to
validate
the chosen
color
. The
color
stops
blinking.
a)
Go back to point
1
to
adjust
another function or
b)
Press the
PTT
switch (
17
) to
validate
and
exit
MENU
. disappears in the display.
5.
If no key is pressed, the unit
exits
MENU
after 10 seconds, disappears in
the display.
Default
COLOR
is (red)
.
2) KEY BEEP
When the function is activated, a beep
sounds
when a key is pressed, by
changing the channel etc.
“BP”
appears on the display when the function
is active.
Press
PUSH
knob (
6
) for 3 seconds to
enter
MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the
KEyBEEP
function.
2.
Press
PUSH
knob (
6
) to
validate.
The current status blinks on LCD.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
activate
On
/
deactivate
Of
the function.
4.
New press
PUSH
knob (
6
) to
validate
. The parameter stops blinking.
a)
Go
back to point
1
to
adjust
another function or
b)
Press the
PTT
switch (
17
) to
validate
and
exit
MENU
. disappears.
English
Summary of Contents for WALKER II FCC
Page 59: ......