43
5.
If no key is pressed for 5 seconds, the unit automatically
exits
EMERGENCY
CHANNEL
without
save
.
EMG2
1.
Using the rotary knob (
6
)
select
a channel other than an emergency chan-
nel.
“EMG”
must not appears on the display.
2.
Press the
AM/FM
key (
4
) to select the modulation mode of the selected
channel.
3.
Long press the
EMG
key (
5
). appears on the display,
“EMG”
blinks. The
message says:
.
4.
Turn the rotary knob (
6
) or use the
UP/DN
keys (
13
) on the microphone th
select the priority channel 2. The message says :
.
5.
Press the
PTT
switch (
12
) ou the
F
key (
9
) to
validate
and
exit
. IF the
KEY
BEEP
function is activated, a long beep sounds to confirm the success of
the operation
(consult then
KEY BEEP
menu page 46).
6.
If no key is pressed for 5 seconds, the unit automatically
exits
EMERGENCY
CHANNEL
without
save
.
6) ROTARY KNOB
Turn the
ROTARY
knob (
4
) to
adjust
channel. Clockwise to
increase
, coun-
terclockwise to
decrease
the channel.
See §
UP
/
DN
BUTTONS ON THE MICROPHONE
page 44.
7) USB CHARGING SOCKET
The
USB
socket (
9
) can be used to charge smartphones, tablets or other
rechargeable devices with 5 V - 2.1 A.
8) ANL/NB ~ HI-CUT ~ NRC
ANL/NB
(short press)
Short press the
ANL/NB
key (
8
) to
activate
/
deactivate
the filters in this order:
The activated filter is shown on the display.
ANL - Automatic Noise Limiter:
This filter allows the reduction of background
noises and some reception interferences. In
AM
mode only.
NB - Noise Blanker:
This filter allows the reduction of back ground noise,
and some reception interference.
HI-CUT
(long press)
Long press the
HI-CUT
key (
8
) to
activate
/
deactivate
the
HI-CUT
filter.
“HIC”
appears on the display when the filter is active.
Hi-Cut:
Eliminates high frequency interferences. Has to be used in accord-
ance with the reception conditions.
NRC
This switchable filter improves the receive and transmit mode.
-
Press the
F
key (
9
). appears in the display.
-
Press the
NRC
key (
8
) to
activate
/
deactivate
the
NRC
.
If a or value other than
0
has been stored
(consult the
NRC SET
menu
page 48)
, otherwise the display indicates
.
When the
NRC
is active, “
” appears on the display..
9) F ~ SKIP ~ MENU
F
(short press)
Allows to
set
/
validate
functions
(see for example §
VOX SETTING
above)
.
This key pressed alone don’t have any use.
See §
FREQUENCY BAND SELECTION
page 44.
See §
TALKBACK
page 45
.
SKIP
(long press only if the
SCAN
function is activated)
This function allows you to
skip
a channel found by the
SCAN
function. When
the scan stops on an unwanted channel, press and hold the
F
key (
9
) for
1 second to
store
this channel in the
SCAN SKIP memory
. A beep sounds.
The channel will no longer be scanned.
See the §
SCAN
page 44.
Consult the
SCAN SKIP
menu page 47 and the
RESET
menu page 49
.
MENU
(short press + long press)
Press
F
key (
9
) firs time.
is displayed. Long press
F
key (
9
) second time to
enter
the
MENU
See §
MENU
page 45.
10) VOX ~ VOX SETTING
VOX
(short press)
The
VOX
function allows
transmitting
by speaking into the original micro-
phone (or in the optional vox microphone) without pressing the
PTT
switch
(
11
). The use of an optional vox microphone connected to the rear panel
of the transceiver (
C
)
disables
the original microphone.
Short press the
VOX
key (
10
) in order to
activate
the
VOX
function.
“VOX”
appears on the display. Short press again the
VOX
key (
10
) to
disable
the
function.
“VOX”
disappears.
English